PC CHIPS P63G (V1.0) Guía de usuario

Busca en linea o descarga Guía de usuario para Placas base PC CHIPS P63G (V1.0). PC CHIPS P63G (V1.0) motherboard Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 56
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
i
Motherboard User’s Guide
This publication, including photographs, illustrations and software, is under the
protection of international copyright laws, with all rights reserved. Neither this
user’s guide, nor any of the material contained herein, may be reproduced without
the express written consent of the manufacturer.
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof
and specifically disclaims any implied warranties of merchantability or fitness for
any particular purpose. Further, the manufacturer reserves the right to revise this
publication and to make changes from time to time in the content hereof without
obligation of the manufacturer to notify any person of such revision or changes.
Trademarks
IBM, VGA, and PS/2 are registered trademarks of International Business Ma-
chines.
MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered trademarks of
Intel Corporation.
Microsoft, MS-DOS and Windows XP/Vista/7 are registered trademarks of Microsoft
Corporation.
AMI is a trademark of American Megatrends Inc.
It has been acknowledged that other brands or product names in this manual are
trademarks or the properties of their respective owners.
Static Electricity Precautions
1. Don’t take this motherboard and components out of their original static-
proof package until you are ready to install them.
2. While installing, please wear a grounded wrist strap if possible. If you
don’t have a wrist strap, discharge static electricity by touching the bare
metal of the system chassis.
3. Carefully hold this motherboard by its edges. Do not touch those compo-
nents unless it is absolutely necessary. Put this motherboard on the top of
static-protection package with component side facing up while installing.
Pre-Installation Inspection
1. Inspect this motherboard whether there are any damages to components
and connectors on the board.
2. If you suspect this motherboard has been damaged, do not connect power
to the system. Contact your motherboard vendor about those damages.
Copyright © 2011
All Rights Reserved
P63G Series, V1.0
March 2011
Vista de pagina 0
1 2 3 4 5 6 ... 55 56

Indice de contenidos

Pagina 1 - Pre-Installation Inspection

iMotherboard User’s GuideThis publication, including photographs, illustrations and software, is under theprotection of international copyright laws,

Pagina 2 - Table of Contents

7Chapter 2: Motherboard InstallationI/O PortsThe illustration below shows a side view of the built-in I/O ports on themotherboard.PS/2 MouseUse the up

Pagina 3

8Motherboard User’s GuideInstalling the ProcessorThis motherboard has a LGA1155 socket for latest 2nd Generation Intel® CoreTM Family processors. When

Pagina 4 - Chapter 1 Introduction

9Chapter 2: Motherboard InstallationNote 1: To achieve better airflow rates and heat dissipation, we suggest that you use a high quality f

Pagina 5

10Motherboard User’s GuideInstalling Memory ModulesThis motherboard accommodates two 240-pin DIMM sockets for unbuffered DDR31333/1066 memory modules,

Pagina 6 - Chapter 1: Introduction

11Chapter 2: Motherboard InstallationMemory Module Installation ProcedureThese modules can be installed with up to 16 GB* system memory. Refer to the

Pagina 7 - Package Contents

12Motherboard User’s GuideJumper SettingsConnecting two pins with a jumper cap is SHORT; removing a jumper cap fromthese pins, OPEN.CLR_CMOS: Clear CM

Pagina 8

13Chapter 2: Motherboard InstallationPin Signal Pin Signal1 HD_LED_P(+) 2 FP PWR/SLP(+)3 HD_LED_N(-) 4 FP PWR/SLP(-)5 RESET_SW_ N( -) 6 POWER_SW_P( +)

Pagina 9 - Motherboard Components

14Motherboard User’s GuidePin Signal Pin Signal1VCC2Key3 NC 4 SignalConnecting Optional DevicesRefer to the following for information on connecting th

Pagina 10 - I/O Ports

15Chapter 2: Motherboard InstallationF_AUDIO: Front Panel Audio HeaderThis header allows the user to install auxiliary front-oriented microphone and l

Pagina 11 - Installing the Processor

16Motherboard User’s GuidePin FuctionShort Chassis cover is removedOpen Chassis cover is closedPin Signal Pin Signal1 TPM-CLK 11 LAD02GND 12GND3 LFRA

Pagina 12

iiMotherboard User’s GuideTrademark...iStatic

Pagina 13 - Installing Memory Modules

17Chapter 2: Motherboard InstallationInstall Other DevicesInstall and connect any other devices in the system following the steps below.Serial ATA Dev

Pagina 14 - * For reference only

18Motherboard User’s GuideFollow the steps below to install an PCI Express expansion card.1 Locate the PCI Express slot on the motherboard.2 Remove th

Pagina 15 - Jumper Settings

19Chapter 2: Motherboard InstallationPCI Express x16 SlotYou can install an external PCI Express graphics card that is fully compliant to thePCI Expre

Pagina 16 - Install the Motherboard

20Motherboard User’s GuideChapter 3 BIOS Setup UtilityIntroductionThe BIOS Setup Utility records settings and information of your computer, suchas dat

Pagina 17 - Connecting Optional Devices

21Chapter 3: BIOS Setup UtilitySome options on the main menu page lead to tables of items with installed valuesthat you can use cursor arrow keys to h

Pagina 18

22Motherboard User’s GuideAdvanced Setup PageThis page sets up more advanced information about your system. Handle thispage with caution. Any changes

Pagina 19 - ME_UNLOCK: ME Unlock Header

23Chapter 3: BIOS Setup UtilityPress <Esc> to return to the Advanced Menu page.PC Health StatusOn motherboards support hardware monitoring, this

Pagina 20 - Install Other Devices

24Motherboard User’s GuideSMART Fan Mode (Normal)This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for abetter operation

Pagina 21 - Expansion Slots

25Chapter 3: BIOS Setup UtilityEUP Support (Enabled)This item allows user to enable or disable EUP support.Resume By PS2 MS (S3) (Disabled)This item e

Pagina 22

26Motherboard User’s GuideACPI SettingThe item in the menu shows the highest ACPI sleep state when the systementers suspend.ACPI Sleep State (S3(Suspe

Pagina 23 - Chapter 3 BIOS Setup Utility

iiiMotherboard User’s GuideNotice:1 Owing to Microsoft’s certifying schedule is various to every supplier,we might have some drivers not certified yet

Pagina 24 - Main Setup Page

27Chapter 3: BIOS Setup UtilityGenuine Inter(R) CPU 0 @ 3.00GHzThis is display-only field and diaplays the information of the CPU installed in yourcom

Pagina 25 - LAN Configuration

28Motherboard User’s GuideSATA ConfigurationUse this item to show the mode of serial SATA configuration options.Serial-ATA Controller 0/1 (Compatible/

Pagina 26

29Chapter 3: BIOS Setup UtilityUSB ConfigurationScroll to this item and press <Enter> to view the following screen:All USB Devices (Enabled)Use

Pagina 27

30Motherboard User’s Guidef Serial Port 0 ConfigurationThis item shows the information of the super IO chip.Serial Port (Enabled)This item allows you

Pagina 28 - Power Management Setup

31Chapter 3: BIOS Setup UtilityTPM Configuration TPM Support [Enabled]Current TPM Status Information NO TPM HardwareAptio Setup U

Pagina 29 - CPU Configuration

32Motherboard User’s GuidefNorth BridgeScroll to this item and press <Enter> and view the following screen:IGD Memory (64M)This item shows the i

Pagina 30

33Chapter 3: BIOS Setup UtilityIGD Multi-Monitor (Enabled)This item enables or disables IGD(Internal Graphics device) multi-monitor.Press <Esc>

Pagina 31 - SATA Configuration

34Motherboard User’s GuideStep 3. Enable IGD Multi-Monitor from BIOS. In the following BIOS screen,please set IGD Multi-Monitor to [Enabled].Main

Pagina 32 - USB Configuration

35Chapter 3: BIOS Setup Utility 2.Select display devices, set the multiple displays option and to extend destop fordisplay “Multi-Monitor technology”.

Pagina 33 - Super IO Configuration

36Motherboard User’s GuideChange the apprearance of your displaysControl Panel All Control Panel Items Display Screen ResolutionSearch Control Pane

Pagina 34 - Trusted Computing

1Motherboard User’s GuideChapter 1 IntroductionThis motherboard has a LGA1155 socket for latest 2nd Generation Intel®®®®® CoreTMFamily processors for

Pagina 35 - Chipset Setup Page

37Chapter 3: BIOS Setup UtilityfSouth BridgeScroll to this item and press <Enter> to view the following screen:Restore AC Power Loss (Power Off)

Pagina 36 - Multi-Monitor technology

38Motherboard User’s GuideAptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Version 2.02.1205. Copyright (C) 2010, American Megatrend

Pagina 37

39Chapter 3: BIOS Setup UtilityThis page enables you to set the clock speed and system bus for your system. Theclock speed and system bus are determin

Pagina 38 - Search Control Panel

40Motherboard User’s GuideNumber of ICC Profiles (N/A)This item shows number of ICC profiles.Current ICC Profiles Index (N/A)This item shows current I

Pagina 39

41Chapter 3: BIOS Setup UtilityPower Limit 2 Switch (Enabled)Use this item to control the Power Limit 2. This is for Turbo mode.Power Limit 1 Value(Wa

Pagina 40

42Motherboard User’s GuidePower Limit 2 Value (81)Use this item to control Power Limit 2. PL2 provides an upper limit of the TDPexcursions. This is fo

Pagina 41

43Chapter 3: BIOS Setup UtilityRAS# to CAS# Delay(tRD) (8)This item specifies the RAS# to CAS# delay to Rd/Wr command to the samebank.RAS# Active Time

Pagina 42 - TWEAK Setup Page

44Motherboard User’s GuideVDIMM (1.548V)This item displays the current VDIMM voltage.CPU Current Voltage (1.212V)This item diplays the CPU current vol

Pagina 43

45Chapter 3: BIOS Setup UtilityThis page enables you to set the keyboard NumLock state.Boot Setup PageBoot Setup PageBoot Setup PageBoot Setup PageBoo

Pagina 44

46Motherboard User’s Guide Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.This page enables you to set setup administrator and passwo

Pagina 45

2Motherboard User’s GuideChipsetThe Intel® H61 Chipset is a single-chip with proven reliability and performance.• High performance Host Interface: Sup

Pagina 46

47Chapter 3: BIOS Setup UtilityBoot OverrideUse this item to select the boot device.This page enables you to exit system setup after saving or without

Pagina 47

48Motherboard User’s GuideChapter 4 Software & ApplicationsIntroductionThis chapter describes the contents of the support DVD-ROM/CD-ROM thatcomes

Pagina 48 - Boot Setup Page

49Chapter 4: Software & ApplicationsThe Browse CD button is a standard Windows command that you can check thecontents of the disc with the Windows

Pagina 49 - Security Setup Page

50Motherboard User’s Guide3 The support software will automatically install.Once any of the installation procedures start, software is automatically i

Pagina 50 - Save & Exit Setup Page

Chapter 5: Trouble Shooting Tips51StarStarStarStarStart up prt up prt up prt up prt up proboboboboblems during assemblems during assemblems during ass

Pagina 51 - Installing Support Software

Motherboard User’s Guide52c) The PC suddenly shuts down while booting up.1. The CPU may experience overheating so it will shutdown to protect itself.

Pagina 52

Power Buon is pressed but PC fails to start. Yes Check if Power Supply Unit(PSU) is workingNoNoAny Beep soundΛNoCLR CMOS and check if CPU 12V power

Pagina 53 - Bundled Software Installation

3Chapter 1: IntroductionThe motherboard uses AMI BIOS that enables users to configure many systemfeatures including the following:• Power management•

Pagina 54

4Motherboard User’s GuidePackage ContentsYour motherboard package ships with the following items: The motherboard Two Serial ATA cables The Softwar

Pagina 55

5Chapter 2: Motherboard InstallationChapter 2 Motherboard InstallationTo install this motherboard in a system, please follow these instructions in th

Pagina 56

6Motherboard User’s GuideMotherboard ComponentsLABEL COMPONENTSLGA1155 socket for 2nd Generation Intel® CoreTM FamilyProcessors2. CPU_FAN 4-pin CPU c

Comentarios a estos manuales

Sin comentarios